Make your kitchens renders stand out with this fully parametric 2-piece traditional Revit kitchen with island that includes: gas stove, sink, refrigerator, exhaust fan, microwave, blacksplash and more. Ideal for making your kitchens look finished and unique in a few clicks, this kitchen is packed with parameters to adapt it to your available space and design requirements. Each piece of the kitchen if fully detailed to add extra realism to the family. Start by adjusting the overall size of the kitchen to your space using the length (on each of the two pieces), and circulation width parameters (available on the stove side part). Then, dive deeper into the parameters to change the upper cabinets height, the stove width, the sink width, the sink faucet rotation, the island length and width, the refrigerator width as well as the visibility of several parts of the kitchen (stove, faucet, backsplash, refrigerator, etc.). If this is not enough, you can also customize the refrigerator to have one or two doors, to display a water-ice dispenser, as well as customizing the length of the island to match the length of the stove side automatically (among other things). For all these reasons, this kitchen, along with its infinite variations, is a must have family in everyone’s families library.
- Parametric: Yes
- Hybrid*: No
- Compatible with: Revit 2016 and higher.
- Family type: Generic Model
- Materials/textures: Yes
- Approximate file size: 6.79 MB
- File format: .rfa
- Parametric: Yes
- Hybrid*: No
- Compatible with: Revit 2016 and higher.
- Family type: Generic Model
- Materials/textures: Yes
- Approximate file size: 4.18 MB
- File format: .rfa
This Revit family traditional kitchen with island comes with the following customizable parameters and options:
This kitchen (divided into two files) includes:
- Gas Stove
- Sink
- Refrigerator
- Built-in Exhaust Fan
- Microwave
Stove/Sink Side (Part 1)
Length of the kitchen:
- Minimum length: 8′
- Maximum length: 40′
Circulation width minimum (distance between the island and the arm of the stove): 3′
Upper cabinets position: 4’6″ from the ground
Upper cabinets height:
- Minimum height: 3’6″
- Maximum height: 19’6″
Upper cabinets height can be matched to the project level
- Minimum project level height: 8’6″
Crown moulding height: 6″ (cannot be changed)
Width of Stove:
- Minimum stove width: 2’6″
- Maximum stove width: 4′
Width of sink:
- Minimum sink width: 2’6″
- Maximum sink width: 4’6″
The faucet in the sink can rotate between -45 and 45 degrees
Island dimensions:.
- Minimum length: 8′
- Maximum length: Cannot be longer than the maximum length of the kitchen
- Minimum width: 3’6″
- Maximum width: 30′
If “Match Island to Stove Arm Length” is on, the length of the island will match the length of the kitchen. If “Match Island to Stove Arm Length” is off, you can set a smaller length for the island and you can also justify it center, left or right.
The following kitchen parts can be removed in case you want to use your own:
- Stove
- Faucet
- Backsplash
Refrigerator Side (Part 2)
Length of part 2:
- Minimum length: 9’6″
- Maximum length: 40′
Upper cabinets height can be matched to the project level
Upper cabinets height:
- Minimum height: 3′
- Maximum height: 19’6″
Refrigerator width:
- Minimum refrigerator width: 2′
- Maximum refrigerator width: 3’6″
Refrigerator can be turned off in case you want to add your own refrigerator. Also, the water-ice dispenser on the refrigerator door can be turned on/off. The refrigerator can turn into a 2 door refrigerator by activating the “Freezer on Left Door” option.
The shelf in the middle can be turned on/off.
Material parameters for:
- Cabinets
- Countertop
- Handles
- Backsplash
- Upper Cabinets Glass
- Stove
- Burners
- Burner Grill
- Knobs
- Window
- Screen
- Exhaust Interior
- Sink
- Faucet
- Refrigerator
- Water dispenser
- Microwave
- Microwave Screen
- Microwave Window
NOTE: This family is not intended to be used as a professional kitchen design tool.
* Hybrid families combine native Revit objects with other 3D applications’ objects for a more organic and realistic look to the families. The objects coming from other 3D applications are configured to NOT have mesh lines (only outlines) and to display in black.
All files are delivered in zip format. Before using your 3D models, you will need to unzip the downloadable file using a 3rd party software like Winzip or Peazip. Make sure you have a software to unzip files before purchasing 3D models.